Need help?Do you have a question about the CognitiveTPG Blaster ADVANTAGE and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Print Speed | Up to 4 IPS (101 mm/sec) |
| Media Width | 0.75" (19mm) to 2.25" (57mm) |
| Connectivity | USB, Serial, Ethernet |
| Interfaces | USB, Serial, Ethernet |
Lists available standard cables for Advantage printers.
Details serial port parameters like speed, parity, word length, and stop bits.
Instructions for connecting the printer to AC power.
Step-by-step guide for loading labels or tags.
Procedure for installing a ribbon for thermal transfer printing.
Configuring the printer for direct thermal or thermal transfer mode and indexing.
How to print a self-test label to check printer operability.
Instructions on how to feed blank labels through the printer.
Steps to send data from a host computer or terminal to the printer.
How the host computer sends commands to print labels.
How to produce labels by sending direct ASCII commands to the printer.
Detailed instructions for cleaning the printhead and drive roller.
Steps to diagnose and resolve the printer power indicator not lighting up.
Steps to diagnose and resolve the printer READY light not lighting up.
Steps to diagnose and resolve the printer READY light being red.
Steps to diagnose why the printer fails to print a self-test label.
Steps to diagnose why the printer fails to feed a label.
Steps to resolve host communication or "printer not ready" issues.
Steps to diagnose and resolve continuous label feeding.
Steps to diagnose and improve print quality issues.
Steps to diagnose and resolve issues with the Ethernet link light.
Provides general, sales, and technical support contact details.
Guide to installing and using the Cognitive Intellidriver.
Guide to installing and using the LabelMagic software package.
To Next Page
