Need help?Do you have a question about the Coinco 9300-S Series and is the answer not in the manual?
General| Model | 9300-S Series |
|---|---|
| Category | Cash Counters & Coin Sorters |
| Type | Coin Sorter |
| Coin Capacity | Varies by model |
| Interface | RS-232 |
| Dimensions | Varies by model |
| Weight | Varies by model |
Step-by-step guide for physically installing the coin changer into a vending machine.
Instructions for configuring vend price and various operational options using the switch module.
Explains the process by which the changer identifies and validates inserted coins using sensors and coils.
Details how accepted coins are routed to the cash box or coin tubes based on tube status.
Describes how low and full tube sensors monitor coin levels for change payback and coin routing.
Explains how the changer handles situations where exact change cannot be made.
Details the mechanism and process of dispensing coins for change, escrow, or manual inventory.
Guidelines for regular maintenance to improve performance and extend the changer's lifespan.
Instructions for disassembling and replacing key modules like the acceptor, logic board, and tube assembly.
Procedure for clearing coin jams from the cash box chute or reject chute.
Continues the troubleshooting guide with common issues like coin acceptance, vending, and payout problems.
Troubleshooting guide for the 9302-GX model, covering issues like exact change, vend price, and coin routing.
To Next Page
