Need help?Do you have a question about the Coinco Guardian 6000 and is the answer not in the manual?
General| Brand | Coinco |
|---|---|
| Model | Guardian 6000 |
| Category | Cash Counters & Coin Sorters |
| Language | English |
Instructions for inspecting, handling, and physically installing the Guardian coin changer into a vending machine.
Details the physical steps for removing the acceptor and mounting the changer housing securely.
Provides three methods for loading coins into the changer tubes: swing-out cassette, removing cassette, or front tubes only.
Explains how to enable and disable the Float Mode to maintain predefined coin levels in the tubes.
Describes the process of powering up the changer, including auto-tests and display messages.
Instructions on how to verify proper payout operation by dispensing coins from each tube.
Summarizes manual and auto payout modes, including keystrokes for each operation.
Provides an overview of menu navigation and special hotkeys for the Guardian 6000 changer.
Visual representation of the main menu and its sub-sections, indicating page references.
Lists and explains the function of special keypad hotkeys for streamlined operations.
Detailed breakdown of the Setup menu options, including descriptions and page references.
Outlines the main menu structure, categorizing functions into Audit, Setup, and Recommendations.
Explains parring as restoring the changer to its original float level using automated or visual methods.
Step-by-step guide for the automated parring routine, including coin insertion and system checks.
Instructions on how to turn the Overfill Paydown feature on or off for coins exceeding the Float level.
Details the Guardian's capabilities for tracking and reporting sales data, including Current and Historical Data.
Details the different tube sizes and their possible positions, including shim requirements.
Assigns coins to specific payout tubes, necessary when replacing or moving tubes.
Step-by-step menu navigation for changing cassette and tube configurations.
Detailed steps for performing a field tune to identify and block counterfeit or foreign coins (slugs).
Describes the automated process for parring the changer, requiring Float to be set.
Explains the Float Paydown feature, routing excess coins to the cashbox when tubes are full.
Describes the data stored since the last user reset, accessible via menu or hotkeys.
Explains how to change individual coin tubes within the payout cassette.
Step-by-step guide for removing and installing individual coin tubes into the payout cassette.
Instructions for configuring standard cassette designations using the menu.
Explains how to block slugs by completing a simple field tune using a sample slug.
Instructions for enabling acceptance of a token by completing a simple field tune.
Details visual parring methods, only usable when Float Mode is disabled.
Instructions on how to clear all changer data stored since the last user reset.
Explains the need to reprogram coin routing after changing coin tubes, referencing Cassette Configuration.
Guides users on configuring custom tube and coin routing combinations.
To Next Page
