Need help?Do you have a question about the Coinco S75-9800A and is the answer not in the manual?
General| Type | Coin Sorter |
|---|---|
| Model | S75-9800A |
| Manufacturer | Coinco |
| Protocol | RS-232 |
| Power Supply | AC 110V/220V |
Highlights key technical capabilities and design benefits of the coin changer.
Introduces the main functional parts of the coin changer.
Details coin return electro-magnets, coin tube blockouts, inventory switch, and coin switches.
Describes the DC motor, transformer, thermal cut-off, and electronic logic board.
Explains the power supply requirements and the function of the PC Link on the logic board.
Explains the electrical flow and states when the changer is in stand-by mode.
Details the sequence of operations for inserting nickels and initiating a vend.
Describes dime insertion for change payout and quarter processing.
Provides procedures for adjusting and testing the coin switches.
Outlines simple functional tests for coin switches and the tube empty switch assembly.
Covers checking coin return electro-magnets for noise and transformer winding resistance.
Details how to check the thermal cut-off and the payout motor's resistance.
Explains logic board removal and lists available servicing tools from Coinco.
Step-by-step instructions for desoldering components using solder wick and a soldering iron.
Visual inspection guidelines for the logic board and changer, plus a sequential test.
To Next Page
