Coinco S75-9800B - User Manual



OP.ERATION AND SERVICE MANUAL

Summary

SECTION 1 PRICING CHANGING INSTRUCTIONS

SECTION 2 INSTALLATION INSTRUCTIONS

SECTION 3 COMPONENT EXPLANATION

A. ELECTRONIC LOGIC SYSTEM

Describes the plug-in logic system, tilt device, and price switches.

B. 5-10 C COIN RETURN ELECTRO-MAGNET (Figure 3-1)

Explains the 5-10c coin return electro-magnet and its function.

C. 25 C COIN RETURN ELECTRO-MAGNET (Figure 3-1)

Details the 25c coin return electro-magnet and its blocking finger.

F. 5 C COIN SWITCH AND WIRE ASSEMBLY (Figure 3-2)

Details the 5c coin switch, its location, and function.

G. 10 C COIN SWITCH AND WIRE ASSEMPLY (Figure 3-2)

Explains the 10c coin switch and its signal to the logic system.

H. 25 C COIN SWITCH AND WIRE ASSEMBLY (Figure 3-2)

Describes the 25c coin switch and its pulse to the logic system.

I. TUBE EMPTY SWITCH AND LEVER ASSEMBLY (Figure 3-2)

Explains the tube empty switch assembly and its activation.

J. DC MOTOR AND GEAR CASE ASSEMBLY (Figure 3-2)

Details the DC motor, gear train, and payout slide mechanism.

K. MOTOR CARRIER AND PULSE SWITCH (Figure 3-3)

L. LOW VOLTAGE TRANSFORMER (Figure 3-1)

M. THERMAL CUT-OFF

ELECTRONIC LOGIC BOARD

B. POWER SUPPLY

C. PC LINK

SECTION 4 ELECTRICAL OPERATION SEQUENCE

A. STAND-BY (Figure 4-1)

B. STAND-BY (Figure 4-2)

C. STAND-BY (Figure 4-3)

D. INVENTORY (Figure 4-4)

E. EXACT VEND-NICKEL INSERTIONS VEND PRICE SET @ 15¢ (Figure 4-5)

Details nickel insertion, counting, and the vend relay activation.

F. CHANGE PAYOUT 2 DIME INSERTION VEND PRICE SET @ 15¢ (Figure 4-6)

Explains dime insertion, counting, and nickel payback sequence.

G. QUARTER INSERTION (Figure 4-7)

Describes quarter insertion and its signal to the logic board.

SECTION 6 SERVICING THE COIN CHANGER

A. COIN SWITCHES

5. Checking the Coin Switches (Changer Unplugged)

6. A Simple Function Test on the Coin Switches

B. TUBE EMPTY SWITCH & LEVER ASSEMBLY

C. COIN RETURN ELECTRO-MAGNETS (CREMs)

D. TRANSFORMER

E. THERMAL CUT-OFF

F. PAYOUT MOTOR

G. ELECTRONIC LOGIC BOARD

3. Adding a New PC Link (Figure 6-6 & 6-7)

I. SOLDERING TECHNIQUES

SECTION 7 TROUBLE-SHOOTING THE COIN CHANGER

A. VISUAL CHECKS - LOGIC BOARD

B. VISUAL CHECKS - COIN CHANGER

Coinco S75-9800B Specifications

General

Brand	Coinco
Model	S75-9800B
Category	Cash Counters & Coin Sorters
Language	English