Cointra CAMI 6 - Adjustments; Service and Maintenance

To Next Page

To Previous Page

cod. 3542C100 - Rev. 01 - 09/2022

CAMI

3 SERVICE AND MAINTENANCE

All of the adjustments, commissioning operations and

periodic checks described below must be performed by

an authorized technician in compliance with current re

gulations. FERROLI declines all liability for property da-

mage or injuries caused by unauthorized persons tam-

pering with the unit.

3.1 ADJUSTMENTS

3.1.1 Gas conversion

Conversion of the unit to a type

of gas other than the factory

setting must be performed by

an authorized technician, using

original components and in

compliance with current regu-

lations in the country where the

unit will be used.

The unit can operate with methane gas, LPG or Propa-

ne-Air. It is factory-set for one of the two types of gas, as

indicated on the packaging and technical data plate. To

operate the unit with another type of gas, a conversion

kit must be used.

g. 10 -

g. 11 -

g. 12 -



g. 13 -

g. 14 -



g. 15 -

Related product manuals