Need help?Do you have a question about the Coldelite UC-113G/B and is the answer not in the manual?
General| Brand | Coldelite |
|---|---|
| Model | UC-113G/B |
| Category | Freezer |
| Defrosting System | Manual |
| Phase | 1-Phase |
Procedures for removing the machine from its shipping case and skid.
Guidelines for placing the freezer on a counter, including clearance and leveling.
Instructions for connecting water-cooled models to water supply and drain.
Details on voltage, amperage, fuse size, wiring, and grounding for electrical setup.
Final steps including sealing the machine to the counter and checking beater rotation.
Explains the four positions (OFF, AUTO, ENERGY CONS, BEATER) of the selector switch.
Describes the indicator light and its function when mix levels are low.
Details how the dispense handles control product flow and activate the beater motor.
Introduces the control panel and warns about accessing it only by trained technicians.
Explains various other controls like solenoid valves and their functions.
Removing the mix tank cover and items from the tank.
Removing and disassembling the gravity feed tubes.
Step-by-step guide to reassembling the beater/auger components.
Lists parts and begins the process of reassembling the dispensing head.
Instructions for reassembling the gravity feed tubes with O-rings and sleeves.
Mixing sanitizer solution and filling tanks/cylinders.
Running machine, brushing, and draining sanitizer.
Preparing liquid mix and filling the mix tanks.
Priming cylinders with mix and installing gravity feed tubes.
Adjusting the gravity feed tube sleeve for production rate.
Filling tanks, setting to AUTO, and initial freeze-down.
How to dispense product and create a tapering tower.
Removing feed tubes, softening product, and preparing for wash.
Filling with water/detergent and performing rinse cycles.
Brushing surfaces and draining all water.
Compressor, pressure, cooling system, and refrigerant information.
Beater motor specs, H.O.M. system, and product temperature adjustment.
Explains the belt drive system and spigot switch operation.
Details how to adjust the front micro switch for proper beater motor activation.
To Next Page
