Coleman CT200U-A User Manual

WARNING
Never attempt to start this Mini Bike without reading and
understanding the Owner’s/Operator’s manual. The Owner’s/
Operator’s manual provides information on safety, parts,
functions, pre-ride inspection, starting and maintenance.
!
For questions about these Assembly Instructions, call Coleman
Powersports toll free 888-405-8725
ASSEMBLY/PRE-RIDE INSPECTION
INSTRUCTIONS
CAUTION
032017
CT200U-A
This mini bike was
shipped without engine
oil. Always fill with with
the correct amount and
grade of engine oil as
listed in the owner's
manual.

Coleman CT200U-A Specifications

General

Displacement	196 cc
Max Power	6.5 hp
Starting System	Recoil start
Transmission	Automatic
Drive System	Chain Drive
Max Speed	24 mph
Weight Capacity	200 lbs
Tire Type	Knobby
Frame Type	Steel
Seat Height	26 inches
Engine Type	4-stroke, single cylinder
Brakes	Rear Drum Brake
Tires	19 x 7-8
Wheel Size	19" front / 19" rear

Summary

Assembly and Installation

Removal from Crate

Lists all components and hardware included in the mini bike crate for assembly.

Front Fork Installation

Step-by-step guide for attaching the front fork assembly to the mini bike frame.

Front Fender Installation

Instructions for mounting the front fender using bolts, washers, and nuts.

Front Wheel Installation

Procedure for orienting and installing the front wheel assembly with axle bolt.

Secure Wires and Install Clutch Cover

Guides on securing cables with zip ties and installing the clutch cover.

Maintenance and Adjustments

Engine Oil and Fuel Requirements

Details on filling engine oil and the correct type of gasoline to use.

Tire Pressure and Chain Tension Adjustment

Instructions for checking tire pressure and adjusting chain slack.

Brake Adjustment Procedure

Guides on adjusting the front brake lever free play and rear brakes.

Throttle Adjustment Guide

Steps for setting idle speed and adjusting throttle grip free play.

Pre-Ride Safety Inspection

Starting the Engine