Coleman CT200U-CL User Manual

WARNING
Never attempt to start this Mini Bike without reading and
understanding the Owner’s/Operator’s manual. The Owner’s/
Operator’s manual provides information on safety, parts,
functions, pre-ride inspection, starting and maintenance.
!
For questions about these Assembly Instructions, call Coleman
Powersports toll free 888-405-8725
ASSEMBLY/PRE-RIDE INSPECTION
INSTRUCTIONS
CAUTION
This mini bike was
shipped without engine
oil. Always fill with with
the correct amount and
grade of engine oil as
listed in the owner's
manual.
CT200U-CL
060718

Coleman CT200U-CL Specifications

General

Transmission	Automatic
Fuel Capacity	0.95 gallons
Brakes (Front)	Drum
Brakes (Rear)	Drum
Tires (Front/Rear)	19 x 7-8 / 19 x 7-8
Max Power	6.5 hp
Drive System	Chain Drive
Weight Capacity	200 lbs
Start Type	Recoil Start
Engine Type	196cc 4-stroke OHV single-cylinder

Summary

Removal From Crate

Front Fork Installation

Headlight Bracket Assembly

Front Headlight and Fender Installation

Front Wheel Installation

Secure Wires and Cables Install Clutch Cover

Oil and Fuel

Engine Oil

Details on engine oil type, quantity, and changing procedure.

Fuel Requirements

Information on recommended fuel type and filling procedure.

Tire Pressure

Tires

Check tire pressure for handling, comfort, steering, tire life, and traction.

Chain Tension Adjustment

Check and adjust chain tension to 1/2 - 3/4 in. (15-20mm) using axle bolt and tension nuts.

Brake Adjustment

Brake Lever Adjustment

Adjust front brake lever free play to 2.0-4.0mm (0.08-0.16 in).

Rear Brake Adjustment

Adjust rear brakes by loosening axle bolt and turning adjustment nut for desired braking.

Throttle Adjustment

Throttle Cable Adjustment

Ensure throttle grip free play is .078-.24 in (2-6 mm) and adjust as needed.

Pre-Ride Inspection

Starting Engine