Collective Minds Switch Up - Page 12

6. The player indicators on the Joy-Con
TM
controller will light up one player indicator
LED.
7. Place your RIGHT Joy-Con
TM
controller into Bluetooth pairing mode by pressing
the SYNC button until the player LED’s on it begin to cycle. 
8. Now press the Bluetooth pairing button on the Switch Up
TM 
device. The LED will
flash BLUE to show Bluetooth pairing has begun.
9. Within a few seconds the LED on the Switch Up
TM 
device will be WHITE indicating
that pairing is complete and you will feel a strong vibration on the RIGHT
Joy-Con
TM
controller.
10. The player indicators on the Joy-Con
TM
controller will light up one player indicator
LED.
11. You are now connected to the Switch Up
TM 
device and ready to use your
Joy-Con
TM
controllers.
12. If your Joy-Con
TM
controller player indicators do not all match the player indicator
on the Switch Up
TM 
device then repeat steps 1 - 11.
 