• Soak Time
Once the soak power is reached, this is the time specifying how long
Eon™ sits at soak power before continuing to “Rise to Predeposit”.
• Soak Power
The power percentage that the source will achieve during soak process.
• Rise to Predeposit
The time specifying how long it takes Eon to change the current source
power to the power percentage set for Predeposit.
• Predeposit Time
The time specifying how long Eon™ will maintain the set “Predeposit
Power” before moving into dwell.
• Predeposit Power
The power percentage that the source will achieve during the Predeposit
process.
• Source
The source Eon™ uses to control the selected layer/material. The Eon™
has two sources, Source 1 and Source 2.
• Sensor
Determines which sensor should be used to control the source selected for
the current layer/material.
25
Chapter 3 Program Control
Predeposition process vs. time
To Next Page
Loading...