3. Then there is the "Confirm New Password" window, and again enter
the password to make sure the password is correct. If there is a "Invalid
Password" prompt message, which represents an error when the
password is confirmed, it needs to do it again.
if you want to change a user's password,please run the password
settings again in accordance with the above procedure.
press the "F10" key to save and exit, the password settings will be
effective.
3-7 Boot
Operating system select
Select operating system.When you use the Coffee Lake processor, you need
to set the "Windows 8.X /10" option here.
The set values are:Windows 7 or other OS、Windows 8.X/10、Manual.
Launch Storage OpROM
Open or close ROM traditional large storage device startup options.
The set values are:Disabled、 Enabled.
→←Select Screen
↑↓/Click:Select Item
Enter/ Dbl Click: Select
+/-: Change Opt
F1: General Help
F7: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC/Right Click: Exit
Boot Configuration
Operating system select
Launch PXE OpROM
Launch Storage OpROM
Fast Boot
Bootup Numlock State
Quiet Boot
Update System BIOS
Boot mode select
Set Boot Priority
Boot Option #1
Windows 7 or other OS
Disabled
Enabled
Enabled
On
Enabled
Disabled
UEFI
Main
dvanced
Chi
set
Boot
Securit
C.Ocloc
Exit
26
BIOS Setting