Colorful BATTLE-AX B360M-E PRO V21 - 3-8 Exit

 Bootup Numlock State
Set small numeric keypad status at boot time.
The set values are:On、Off.
 Quiet Boot
Set quiet start.The set values are:Disabled、 Enabled.
 Update System BIOS
Set to update system BIOS.The set values are:Disabled、 Enabled.
 Boot mode select
Select boot mode.The set values are:LEGACY、 UEFI.
Set Boot Priority
Boot device priority settings.If the user wants to install the operating system,
please set "Boot Option #1" as your drive device (CD-ROM) or your U disk
device (provided that your CD-ROM drive has an operating system or your U
disk has an PE system), When setup is complete, press the "F10" key to save
and exit. The system will boot from your drive or U disk.
3-8 Exit
The exit options include saving and exiting settings / not saving, exiting
settings / saving settings, and restarting / saving settings, and restarting /
saving settings / not saving settings / loading, optimizing defaults.
Save Changes and Exit

If you select“Save Changes and Exit”,the following message will appear:
Save configuration and Exit ？
[Yes] [No]
¾ Select "Yes" and press the "Enter" button to store all the settings. If
you don't want to save, select "No" or press "Esc" to return to the
main menu.
27
BATTLE-AX B360M-E PRO V21/BATTLE-AX B360M-HD PRO V21