3.5 PRE-OPERATION CHECKLIST
Should any item malfunction or need adjustment, do not operate vehicle until the problem has been
corrected.
ITEM PROCEDURE
Fully charged or adequately charged to provide power for duration of operations.
The AC cord is disconnected from the vehicle.
Electrolyte level in each cell covers the top of cell plates.
(See Section 4.10 if vehicle is equipped with a Single Point Battery Watering System.)
Batteries are secure and free of corrosion.
Batteries
All terminals and connections are tight.
Tire Pressure
Inflated to recommendation per Section 1.4. Do not exceed maximum stated on tire
sidewall.
Turn lights on and make sure they illuminate.
Check brake/tail lights and turn signals.
Reverse buzzer operating.
Lights, Horn and
Reverse Buzzer
Press horn button to sound horn.
Pedal has firm pedal pressure with minimal travel.
Brakes
Parking brake has proper engagement and release.
Steering Responsiveness and the absence of excessive free play.
Obstacles Path of intended travel is free from obstructions.
Seat Belts Driver and passenger are secured by seatbelts before moving vehicle.
Labels All warning and operation labels in place.
Accelerator Check for smooth operation.
2012 Summit
3-10
To Next Page
Loading...
