8
Chapter 5 - Troubleshooting
Troubleshooting Chart
Problem Recommended Action
Power indicator light does not
turn on.
1. Check for blown fuse.
2. Check for proper voltage at AC receptacle.
3. Replace bad power cords.
Treadmill belt does not turn. 1. Belt may be jammed to one side of drive shaft. Adjust belt tension
and turn belt by hand to loosen.
2. Make sure the belt speed is on 06.0 M/M or above.
3. Make sure the “RUN/STOP” switch is in the “RUN” position.
4. Make sure motor cable is securely connected.
Shocker does not work. 1. Make sure the “SHOCK ON/OFF” switch is in the on position
(forward).
Exercise belt is pulling to one
side of the drive shaft.
1. Belt tension is not equal. Readjust belt tension.
To Previous Page
Loading...
Need help?
General
