Why is my Colzer Dehumidifier not turning on?
Your Colzer Dehumidifier might not be turning on because the power cord is unplugged; in this case, plug it in. Another possibility is that the fuse is blown, or the circuit breaker is tripped, so check the fuse or the circuit breaker.
Why does my Colzer PD123A Dehumidifier operate continuously?
Your Colzer Dehumidifier might be operating continuously because it is in continuous mode. In this case, don’t set the humidity too low; typically, 40-50% are good settings to use. Also, the room humidity might be too high, so change humidity settings or consider a higher capacity dehumidifier. Ensure that all doors and windows are closed.
What to do if my Colzer PD123A Dehumidifier is on but not running?
If your Colzer Dehumidifier is on but not running, make sure the water bucket is empty and properly installed. The room humidity may have reached the set-point, causing the dehumidifier to enter Standby Mode. In this case, set a lower humidity or let the dehumidifier keep in standby mode. Also, the room humidity might be lower than the set humidity. The set humidity needs to be at least 5% (recommend 10%) lower than room humidity. Finally, the dehumidifier may be in the defrosting process. It is normal for the compressor to cease during defrosting.
How to improve insufficient dehumidifying performance in my Colzer PD123A Dehumidifier?
To improve the dehumidifying performance of your Colzer Dehumidifier: 1. Allow at least 3-4 days to maintain the desired relative humidity when first installed. 2. Ensure that all doors, windows, and other openings are closed. 3. Clean the air filter. 4. Ensure there are no obstructions blocking the airflow. 5. Remove items giving off water vapor or turn off such devices. 6. Heat up the room if the temperature is low. 7. Consider increasing the quantity of dehumidifiers or changing to a higher capacity dehumidifier if the current size is too small for the room.
Why is my Colzer PD123A making noise?
Your Colzer Dehumidifier might be making noise because it is not positioned on a level surface; position it on a level surface. The water bucket may not be in the proper position; re-install the water bucket properly. The air filter could be clogged; wash the filter.
What to do if water does not drain from the hose of my Colzer Dehumidifier?
If water does not drain from the hose of your Colzer Dehumidifier, check the hose connection and try attaching the other end of the hose to the outlet. Hoses more than 7 feet long may not drain properly, so keep the hose as short as possible. The hose must be placed lower than the bottom of the dehumidifier and kept flat and smooth without kinks.
Why is there frost on the coils of my Colzer PD123A Dehumidifier?
If frost appears on the coils of your Colzer Dehumidifier, especially when the ambient temperature is low, this is normal. The dehumidifier will defrost automatically.
What to do if the float malfunctions in my Colzer Dehumidifier?
If the float malfunctions in your Colzer Dehumidifier, replace the float of the water bucket.
What to do if the water bucket is full in my Colzer PD123A Dehumidifier?
If the water bucket is full in your Colzer Dehumidifier, empty the water bucket.
What to do if the water bucket has not been installed properly in my Colzer Dehumidifier?
If the water bucket has not been installed properly in your Colzer Dehumidifier, re-install the water bucket properly.
Essential instructions to prevent injury, property damage, and ensure safe operation of the dehumidifier.
Identifies the control panel and outlet on the front of the dehumidifier.
Identifies the handle, air inlet, drain hose outlet, and water tank on the rear.
Details the function of Power, Mode, Humidity, Speed, Timer, and Lighting buttons.
Explains the front display shows humidity, error codes, and similar data to the top panel.
Explains the main humidity display, full bucket indicator, fan speed icons, and mode indicators.
Guidance on positioning the dehumidifier on a level floor with specific clearance for airflow.
Instructions for plugging in the unit, emphasizing the 24-hour waiting period after shipping.
Steps to power on the dehumidifier, including default settings and troubleshooting for non-operation.
Details on how to use the DEHUMIDIFY mode, including setting humidity and automatic operation.
Instructions for using the DRY mode for laundry, including optimal conditions and button limitations.
Guide on setting AUTO-ON and AUTO-OFF timers for the dehumidifier between 1-24 hours.
Step-by-step guide with diagrams on how to safely remove and empty the water bucket.
Instructions for setting up a continuous drain hose for automatic water removal.
Explanation of automatic features like Auto Shut Off, delayed restart, auto defrost, and auto-restart.
Details on cleaning the dehumidifier's vent, case, and water reservoir to prevent mold and bacteria.
Procedure for cleaning the air filter, including frequency and proper washing techniques.
Steps for preparing the dehumidifier for storage, including cleaning, drying, and covering.
Lists common error codes (E1, E2, E4, E7) and their corresponding problems and solutions.
Step-by-step instructions on how to reset the dehumidifier to its default settings.
Details the 1-year limited warranty, what it covers, and common exclusions like wear and tear.
Information on product registration and how to contact customer service for issues or support.
This document is a user manual for the COLZER Dehumidifier, models PD123A and PD223A. It provides comprehensive instructions for operating, maintaining, and troubleshooting the device, ensuring its reliability and longevity.
The COLZER Dehumidifier is designed to remove excess moisture from the air, creating a healthier and more comfortable indoor environment. It operates by drawing in humid air, passing it over cooling coils to condense the moisture, and then releasing drier air back into the room. The collected water is stored in a removable bucket or can be continuously drained via a hose. The dehumidifier offers two primary working modes: DEHUMIDIFY (DH) mode for general moisture removal and DRY (Laundry Dry) mode for drying clothes.
To prevent internal damage, especially to the refrigeration system, it is crucial to keep the dehumidifier upright during transport and allow it to stand upright and outside its box for 24 hours before plugging it in. This allows the oil in the compressor to settle.
The dehumidifier should be placed on a smooth, level floor, table, or shelf that is strong enough to support it when the water bucket is full. For optimal efficiency, it should be operated in an enclosed area with doors and windows closed. A minimum clearance of 20 cm (7.9 inches) on the sides and back, and 40 cm (16 inches) on the top, is required for proper air circulation. When used for drying wet clothes, a minimum clearance of 40 cm (16 inches) to the air outlet is necessary to prevent water dripping into the unit. The recommended ambient operating temperature is between 5°C (41°F) and 35°C (95°F). The power cord should be uncoiled and firmly plugged into a properly grounded 110-120 volt AC outlet. Upon plugging in, the control panel will light up for 1-2 seconds and then turn off, indicating a normal self-diagnosis process.
The dehumidifier features a top control panel with a digital display and six buttons: POWER, MODE, HUMIDITY, SPEED, TIMER, and LIGHTING. The top digital display shows the current settings and status, while a front digital display mirrors this information for easy visibility from a distance.
Press the POWER button to turn the dehumidifier on or off. When turned on, it typically defaults to 30% set humidity at low fan speed in DEHUMIDIFY mode. If the "FULL" icon illuminates upon startup, the water bucket needs to be properly re-installed.
DH (DEHUMIDIFY) Mode: In this mode, the dehumidifier operates as a humidistat, automatically stopping and restarting to maintain the room humidity within ±3% of the set point. For example, if the set humidity is 50%, the unit will stop at 47% and restart at 53%. If the set humidity level is not at least 3% lower than the room humidity, the dehumidifier will not start, and the DH icon will flash. If the room humidity drops to the set-point, the dehumidifier will auto-stop, and the DH icon will flash. Setting the target humidity to 30% activates CONTINUOUS Mode, where the dehumidifier runs continuously until the water bucket is full.
DRY (Laundry Dry) Mode: This mode is designed for drying clothes. The dehumidifier runs continuously at high fan speed. The HUMIDITY and SPEED buttons are disabled in this mode.
The TIMER function allows setting an AUTO-ON or AUTO-OFF timer for 1 to 24 hours.
Press the LIGHTING button to put the display into sleep status, turning off the digital display and button backlights (except POWER and LIGHTING buttons). The dehumidifier continues running. Press LIGHTING again to restore the display and button functions.
Press and hold the SPEED button for 3-5 seconds to display the room temperature in Fahrenheit. After 5 seconds, the LCD will revert to displaying room humidity.
To avoid electric shock, always turn off and unplug the dehumidifier from the power source before performing any cleaning or maintenance.
General| Model Number | PD123A |
|---|---|
| Type | Dehumidifier |
| Dehumidification Capacity | 12L/Day |
| Water Tank Capacity | 2.5L |
| Operating Temperature | 5°C - 35°C |
| Weight | 11kg |
To Next Page
