Com G-95 - Function Menu Configuration; Menu Item Descriptions (Part 1)

12
Function Menu
Note that due to part 95 requirements many of the menu functions have been restricted or
deactivated.
To enter the menu press the knob to the right of the screen. Menus may be quickly jumped to by
typing the menu number in on the hand mic.
Menu
#
Menu
Name
Description
Secondary
Menu
Notes
0 TMR
Transmit Multi Receive -
This mode selects what
displays are monitored in
the background besides
the primary selected
channel
Off
Disable TMR
M+A
Main band + A band standby
M+B
Main band + B band standby
M+C
Main band + C band standby
M+D
Main band + D band standby
M+A+B
Main band +A & B band standby
M+A+C
Main band + A & C band standby
M+A+D
Main band + A & D band standby
M+B+C
Main band + B & C band standby
M+B+D
Main band + B & D band standby
M+C+D
Main band + C & D band standby
M+A+B+C
Main band + A, B & C band standby
M+A+C+D
Main band + A, C & D band standby
M+B+C+D
Main band + B, C & D band standby
A+B+C+D
All bands are monitored on standby
1 STEP Frequency Step Size Setup
2.50k
In frequency step in VFO
(frequency) mode, press (up) and
(down) to select step figure.
5.00k
6.25k
10.00k
12.50k
25.00k
2 SQL Squelch Level 00 > 09
10 Squelch levels
00 = minimum / normally open
3 TXP Transmit Power
High
Full Power ~20W
Low
Reduced power ~7W
4 SCR Scrambler
On
Scrambler Function Enabled
Off
Scrambler Function Disabled
5 TOT TX Time Out Timer
15 > 600 sec
15 Second Steps
6 APO Auto Power Off
30, 60 > 300
Minutes
Time set that the radio will power
down after the last signal is received
Off
Turns off APO option
7
WN
Bandwidth
Wide Band
25.0 kHz (disabled in this version)