Com G-95 - Page 18

14
Menu
#
Menu
Name
Description
Secondary
Menu
Notes
19 SPMUTE Speaker Mute Setting
QT
Squelch opens for CTCSS/DCS tones
only.
AND
Squelch opens when CTCSS/DCS
tone is recognized along with the
optional signaling.
OR
Squelch opens when either the
CTCSS/DCS tone or the optional
signaling is recognized.
20 PTT-ID PTT-ID- When to send
Off
Do not send
BOT
Send at beginning of transmission
EOT
Send at the end of transmission
Both
send at both beginning and end
21 PTT-LT PTT ID - transmit Delay
0 > 30
Set delay time before transmitting
PTT-ID
22 S-INFO Auto Group Dialing
Group
Signal Code
Memory
1 > 15 (Can only be set with
software)
23 EMC-TP Alarm Mode
ALARM
Turn on alarm sound
ANI
Send alarm code and ID Code
Both
Both of the above
Off
Alarm mode completely disabled
24
EMC-CH
Alarm Channel
000 > 199
Specified Alarm Channel
25 SIG-BP Signal Beep
On
Pager ring at reception of matching
2Tone / 5Tone / DTMF
Off
26 CHNAME Channel Name edit
Channel Mode, edit the current
name
27 CA-MDF Channel A Display Mode
FREQ
In channel mode, display the
selected format in display A
CH
NAME
28 CB-BDF Channel B Display Mode
FREQ
In channel mode, display the
selected format in display B
CH
NAME
29 CC-MDF Channel C Display Mode
FREQ
In channel mode, display the
selected format in display C
CH
NAME
30 CD-BDF Channel D Display Mode
FREQ
In channel mode, display the
selected format in display D
CH
NAME
31
LANGUA
Language
English
Screen prompts display language