ComAp InteliNano MRS 3 - Fast User's Guide Manual

InteliNano
NT
MRS 3
IMPORTANT: D+ is not used, connect this terminal to battery
positive!
Terminal Description
T01 BATT-
T02 D+
T03 BATT+
T04 Binary input – Emergency stop
T05 Binary output –Start (6A)
T06 Binary output – Fual Solenoid (6A)
T07 Binary output (500 mA)
T08 Binary input/output (500 nA)
T09 Binary output (500 mA)
T10 Binary output (500 mA)
T11 Com for nalog inputs binary input
T12 Binary input – Remote start
T13
Binary/analog input –
Low Fuel Level
T14
Binary/analog input –
Coolan Temperature
T15 Binary/analog input – Oil Pressure
T18 RPM
IN
T19 RPM
GND
T20 COM (I)
T21 Phase1 (k)
T22 Phase2 (k)
T23 Phase3 (k)
T25 Neutral
T27 Phase1
T29 Phase2
T31 Phase3
L
COM
H
InteliNano NT MRS 3 Fast User Guide
1
Fast user guide