Do you have a question about the Comelit 4893M and is the answer not in the manual?
Brand | Comelit |
---|---|
Model | 4893M |
Category | Intercom System |
Language | English |
Guidelines for optimal camera placement and viewing angles for installation.
Details of the wall-mounted Quadra series door entry monitor, including its features.
Explanation of DIP-switches for programming and terminal block connections.
Covers general data, audio/camera features, and electrical specifications of the unit.
Details hardware components, environmental ratings, and key system functions.
Step-by-step instructions for physically installing and wiring the door entry monitor.
Instructions for replacing nameplates and ensuring the product's water-tight seal.
Detailed procedure for replacing nameplates on the door entry monitor.
Configuration options for various functions using DIP-switches on the entrance panel.
Steps to program call codes for two-family and four-family system configurations.
Procedure for resetting the system's DIP-switch settings to their factory default values.
Guide on programming additional entrance panels for system expansion.
Specific DIP-switch settings required when adding new entrance panels.
Instructions for setting generic call addresses for apartment units.
Procedure to restore the entire system to its original factory default configuration.
Details of the 33 VDC power supply unit, including its connections and protection features.
Technical specifications for the 1209 power supply unit, covering electrical and physical attributes.
Detailed description of the PL6721 hands-free colour door entry monitor.
Identification of the monitor's speaker, user code DIP-switch, and video closure jumper.
Explanation of the default functions assigned to the front buttons of the door entry monitor.
Details on activating silent mode and navigating the monitor's user menu.
Explanation of the different states and meanings of the indicator LEDs on the device.
Technical specifications for the PL6721 door entry monitor, including display and hardware.
Covers environmental compliance, certifications, and general features of the monitor.
Overview of programming user codes via MyComelit app or DIP-switches.
Step-by-step guide for programming user codes using the MyComelit smartphone application.
Continuing the app programming guide for sequential user code setup and confirmation.
Instructions on using DIP-switches to set user codes on the door entry monitor.
Details on installing the door entry monitor and its various fixing point options.
Procedures for safely disassembling the monitor and managing its connection terminals.
Explanation of factory-programmed and customizable functions for the door entry monitor buttons.
Guide to using the installer menu to change button functions and addresses.
Illustrative example of programming intercom functions for apartments using the installer menu.
Overview of advanced functions programmable via the MyComelit app, including settings and restoration.
Explains the roles and behavior of main and secondary door entry monitors in a system.
Details on programming intercom calls to the same or different apartments.
Procedure for programming intercom calls to a single specific door entry monitor.
Programming group intercom and associating functions with the CFP input.
Guide to programming and managing intervals of user codes for receiving calls.
Table showing maximum operating distances based on different cable types and gauges.
Illustrates a fundamental wiring setup for the system components.
Diagrams showing wiring for more complex systems with multiple units and distributors.
Diagrams illustrating how to expand the system with additional door entry monitors.
Guide on setting entrance panels as either 'Main' or 'Secondary' in the system.
Visual examples of system configurations with multiple entrance panels connected.
Instructions on using the entrance panel relay for controlling generic actuators.
Comprehensive table mapping user codes to specific DIP-switch ON/OFF configurations.