Comelit Simplebus Color 4660C User Manual

Assistenza tecnica Italia 0346/750090
Commerciale Italia 0346/750091
Technical service abroad (+39)0346750092
Export department (+39) 0346750093
PT
FICHA
TÉCNICA
IT
FOGLIO
TECNICO
EN
TECHNICAL
SHEET
FR
FEUILLE
TECHNIQUE
NL
TECHNISCHE
HANDLEIDING
DE
TECHNISCHES
DATENBLATT
ES
HOJA
TÉCNICA
FT SBC 04
Comelit Group S.p.A. - Via Don Arrigoni 5 - 24020 Rovetta S. Lorenzo BG Italy - tel. (+39) 0346 750 011 - fax (+39) 0346 71436
www.comelit.eu www.simplehome.eu info@comelit.it commerciale.italia@comelit.it export.department@comelit.it
Videocitofonia a colori con cablaggio a 2 fili
Colour door entry monitor with 2-wire cabling
Parlophonie et visiophonie avec câblage à 2 fils
Tweedraads video-intercomsysteem in kleur
Farbvideo-Türsprechanlage mit 2 -Draht-Leitung
Instalación de vídeo portero en color con 2 cables
Vídeo-intercomunicador a cores com cablagem de 2 fios

Comelit Simplebus Color 4660C Specifications

General

Type	Video Intercom
Technology	Simplebus
Display	Color
Camera	Yes
Night Vision	Yes
Ringtone volume control	Yes
Brightness control	Yes
Contrast control	Yes
Colour control	Yes
Privacy function	Yes
Housing	Plastic
Desk base	Optional
Viewing Angle	90 degrees
Installation	Wall mounted

Summary

General Safety Warnings

Installation and Usage Precautions

Electrical Safety Guidelines

Details wiring safety, qualified personnel, mains switches, and power disconnection procedures.

Mixer-Power Supply Unit (Art. 4888C) Installation and Configuration

System Connection Terminals

Details the wiring terminals for the power supply unit and system connection.

User Management Jumper Settings

Explains how to configure user capacity using JP1, JP2, and JP4 jumpers.

Safety and Installation Guidelines

Monitor Planux Art. 6101 Installation (Flush-Mounted)

Monitor Planux Art. 6101 Installation (Wall-Mounted)

Monitor Bravo/Genius Art. 5702/5802 Installation

Door-Entry Phone Art. 2638 Installation

Installation Steps Overview

Device Configuration

User Code Programming

Explains how to program device codes using DIP switches for identification.

Audio/Video Unit Art. 4660C Button Programming

Programming Procedure Overview

Outlines the steps for programming buttons on the audio/video unit.

Warnings and Notes

Switching Device Art. 1224A Programming

Dip Switch Configuration

Details how to configure the switching device using its dip switches for code ranges.

Dip Switch Programming Table

Installation Rules for Video Entry Phone Systems

Cable Routing and Component Placement

Covers rules for wiring, component placement, and cable proximity.

Distance and System Configuration Guidelines

Provides guidelines for maximum distances and system configurations.

Monitor Self-Ignition Function

Enabling/Disabling Self-Ignition

Monitor Video Request Function

Enabling Video Request

Powercom System Diagram (1-Door)

Component Connections and Distances

Powercom System Diagram (2-Door)

Component Connections

Powercom System Diagram (1-Door, Max 9 Mixers)

System Configuration Details

System Diagram with Remote Camera Module (Art. 1259C)

Powercom System Diagram (1-Main, 9-Secondary Video)

System Wiring and Component Connections

Cascade Connection of Internal Units (SB2/GGC)

Cascade Connection Limits and Requirements

Explains limits and requirements for cascading internal units.

Cascade Connection of Art. 4834/9 and Amplifier Art. 4833C

Cascade Connection Procedure and Limits

Details the procedure and limits for cascading Art. 4834/9 units with an amplifier.

Call Repetition Devices Connection (SB2V/AAK)

Call Repetition Device Limits and Requirements

Explains limits and requirements for connecting call repetition devices.

Monitor Cascade Connection (SB2/A6P)

Cascade Connection for 2 Main Monitors

Shows the cascade connection for two main monitors.

Monitor Bravo/Genius Cascade Connection (Third Monitor) (SB2/A7P)

Cascade Connection Procedure for Third Monitor

Details the cascade connection for a third main monitor with local power.

Cascade Connection of Main and Secondary Monitors (SB2/A8P)

Cascade Connection Procedure for Main/Secondary Monitors

Shows the cascade connection for main and secondary monitors.

Branch Connection of Monitors (SB2/A9P)

Branch Connection Procedure for Main/Secondary Monitors

Monitor Bravo/Genius Cascade Connection (Third Monitor) (SB2/A11BC)

Cascade Connection Procedure

Monitor Bravo/Genius Secondary Monitor Connection (SB2/A10P)

Cascade or Branch Connection Procedure