To Next PageTo Next Page
Need help?Do you have a question about the Comelit Simplebus Color 6114C and is the answer not in the manual?
General| Brand | Comelit |
|---|---|
| Model | Simplebus Color 6114C |
| Category | Intercom System |
| Language | English |
Explains how each device is identified by its code and how to set it using DIP switches on the device or bracket.
Notes on primary/secondary external unit settings, busy signal indications, and short-circuit warnings.
Explains the use of 8-selector DIP switches to define MIN and MAX code ranges for the switching device.
Table mapping codes to specific DIP switch ON settings for device configuration, covering various ranges.
Rules for routing riser wires, connecting terminals Art. 1214/2C and 1216, and terminating risers.
Table detailing maximum distances for various cable types (e.g., 1mm², 0.5mm², UTP5) based on connection types A, B, C, D, E, H.
Instructions for enabling/disabling self-ignition on Bravo/Genius monitors, including confirmation tones and button presses.
How to use the video request function on secondary monitors by pressing button 2 or programmed button.
Table showing maximum distances for different cable types used in the system.
Diagram showing the connection of a remote camera module (Art. 1259C) to the system.
Schematic illustrating a 1-main/9-secondary video input system with multiple components.
Diagram illustrating cascade connection of multiple internal units to the Mixer-power supply Art. 4888C.
Instructions for cascading Art. 4834/9 units and using Art. 4833C amplifier to exceed 9 branches.
Details on connecting call repetition devices (Art. 1229/1122/A), with a limit of 4 total units per branch.
Diagram and explanation for cascading two main Planux monitors powered by the Art. 4888C mixer.
Diagram for cascading a third main monitor with local power supply for Bravo/Genius.
