34
Programming
The programmable buttons are supplied factory programmed with the following functions:
[CCS]
Call to standard
switchboard
(not available in Kit
systems)
[ACTG]
Generic actuator
[AI]
Self activation
[AP]
Lock-release
The programming of these buttons can be customised:
• Using the MyComelit app via a smartphone
• Using the installer menu on the door entry monitor
VIA MYCOMELIT APP VIA DOOR ENTRY MONITOR
<< OR >>
TABLE OF AVAILABLE FUNCTIONS
[AI]
Self activation Real-time viewing of the images from the outdoor entrance
panel camera
[ACTG]
Generic actuator Activation of a generic actuator (art. 1256)
[ACT]
Actuator with code Activation of an actuator with code (art. 1256)
[CCP]
Call to main switchboard
Call to main porter switchboard
[CCS]
Standard call to switchboard
Call to porter switchboard
[INT-I]
Intercom call to the same
apartment
Intercom call to the same apartment
[INT-E]
Intercom call to another apartment
Intercom call to another apartment. You must program the
[ADDRESS] user code for the apartment you want to call
[CAMG]
Generic remote camera Viewing of the images from the cameras connected to
module art. 1259C or 1409 (generic actuator mode)
[CAM]
Remote camera with code Viewing of the images from the cameras connected to
module art. 1259C or 1409 (actuator with code mode)
[PAN]
Panic call
Priority call to porter switchboard
[AP]
Lock-release Door lock activation
[NULL]
No function
cannot be used in KIT systems
To Next Page
Loading...
