Comet ETM Series User Manual

14
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
TECHNICAL CHARACTERISTICS AND SPECIFICATIONS
ETM 100 M ETM 130 M
ELECTRICAL CONNECTIONS
Power supply 230 V - 1~ 50 Hz
Input 2,3 kW 2,9 kW
Fuse 16 A
HYDRAULIC CONNECTION
Maximum water supply temperature 60 °C - 140 °F
Minimum water supply temperature 5 °C - 41 °F
Minimum water supply ow rate 700 l/h - 185 US gph 900 l/h - 238 US gph
Maximum water supply pressure 0,8 MPa - 8 bar - 116 psi
Maximum priming depth 1,5 m - 4,9 ft
PERFORMANCES
Max. ow rate 480 l/h - 127 US gph 720 l/h - 191 US gph
Maximum pressure 13 MPa - 130 bar - 1885 psi
Reaction force on the gun 25 N 32 N
Sound pressure level - Uncertainty (*) 82,2 dB(A) - 0,8 dB(A)
Sound power level 96 dB(A)
Operator arm-hand system vibration - Uncertainty (*) 2,3 m/s
2
- 0,24 m/s
2
WEIGHT AND DIMENSIONS
Length x Width x Height 470 x 260 x 370 mm - (18,5 x 10,2 x 14,6 in)
Weight 23 kg - 51 lb 27 kg - 60 lb
(*) Measurements taken in compliance with EN 60335-2-79
The characteristics and specications are guidelines only. The manufacturer reserves the right to make all modications to the
equipment deemed necessary.
IDENTIFICATION OF COMPONENTS
Refer to gures 1, 2, 3 and 5.
1. Master switch
2. Transport grip
3. Warning plate. Informs about residual risks: not
to be used to wash people, animals, electrical
apparatus and the high-pressure cleaner itself.
Warns that the machine is unsuitable for connecting
up to the drinking water mains (to connect up to the
water mains, a
BA type mains disconnector will be
required which can be purchased from your dealer).
4. Power cable
5. Oil level indicator (ETM 130)
6. Pressure adjustment knob
7. Water outlet connection
8. Identication plate. Shows the serial number and
main technical specications.
9. Spray gun
10. Lance hose
11. Nozzle holder head
12. Nozzle cleaning pin
13. High-pressure hose connection
14. High-pressure hose
15. High-pressure hose quick coupling
16. External detergent suction hose lter
17. External detergent suction hose
18. Spray gun lever safety stop
19. Spray gun lever
20. Water inlet connection
21. Water inlet lter
22. Water inlet quick-t connection seal
23. Water inlet quick-t connection
24. External tank detergent suction coupling
25. Elastic clamp for fastening the detergent suction
hose
26.
BA type water mains disconnector (not supplied)
27. “Priming” device (ETM 130)
SAFETY DEVICES
•Amperecut-outprotectiondevice.
This device stops the high-pressure cleaner operation in the event of excessive power absorption.

Comet ETM Series Specifications

General

Brand	Comet
Model	ETM Series
Category	Pressure Washer
Language	English