Comet XTREME - Specifications and Technical Data; Hydraulic Circuit

19
SPECIFICATIONS AND TECHNICAL DATA
1001 - 1251 - 1501
1001
28/160 T
1001
21/210 T
1251
33/160 T
1251
21/250 T
1501
42/130 T
1501
18/350 T
ELECTRICAL CONNECTIONS
Power supply V – Hz 400 V –3~50 Hz
Input kW – CV 8,5 - 11,6 10,0 - 13,6 11,5 - 15,7
Fuse 32 A
HYDRAULIC CIRCUIT
Maximum supply water temperature °C – °F 85 –185
Minimum supply water temperature °C – °F 5 –41
Minimum supply water ow rate l/min – USgpm 34 - 9,0 25 - 6,6 40 - 10,6 25 - 6,6 50 - 13,2 21 - 5,54
Maximum supply water pressure bar – psi 8 –116
Maximum priming depth m – ft 1,5 –4,9 (modelli senza Total Stop) - 0 –0 (modelli con Total Stop)
PERFORMANCE
Maximum ow rate l/min – USgpm 28 - 7,4 21 - 5,5 33 - 8,7 21 - 5,67 42,5 - 11,2 18,5 - 4,88
Nominal ow rate l/min – USgpm 25,5 - 6,7 19,3 - 5,1 30,5 - 8,7 21 - 5,54 42,0 - 11,0 18 - 4,75
Maximum pressure bar – psi 160 - 2320 210 - 3045 160 - 2320 260 - 3770 130 - 1885 360 - 5220
Nominal pressure bar – psi 150 - 2175 200 - 2900 150 - 2175 250 - 3625 120 - 1740 350 - 5076
Minimum Total Stop triggering ow rate l/min – USgpm 3 –0,8
Maximum reaction force on the spray gun N 69 64 81 68 99 99
Sound pressure level - Uncertainty dB(A) 86 –0,7 
(1)
Sound power level dB(A) 93
(1)
Operator hand-arm vibration - Uncertainty m /s
2
2,4 –0,24 
(1)
PUMP OIL ENI MULTITECH THT
(2)
WEIGHT AND DIMENSIONS
Length (including handle) x width x height mm – in 900x750x950 –35,4x29,5x37,4
Weight kg – lb 160 –353
(1)
Measurements in agreement with EN 60335-2-79
(2)
Also see the corresponding oils table
The specications and technical data are approximate. The Manufacturer reserves the right to make all changes to the machine it deems appropriate.
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the INSTRUCTION
MANUAL  SAFETY WARNINGS.
EN