Need help?Do you have a question about the Comfast CF-XR186 and is the answer not in the manual?
Details the physical components and indicators of the device.
Lists the four primary operating modes: relay, bridge, AP, and routing.
Instructions for configuring the bridge mode, found in Advanced Mode.
Steps to configure AP mode, including IP address settings for management.
How to set 2.4G/5.8G wireless SSID and password in AP mode.
Details settings for routing mode, including PPPoE, Static IP, and Dynamic IP.
Details the physical components and indicators of the device.
Lists the four primary operating modes: relay, bridge, AP, and routing.
Instructions for configuring the bridge mode, found in Advanced Mode.
Steps to configure AP mode, including IP address settings for management.
How to set 2.4G/5.8G wireless SSID and password in AP mode.
Details settings for routing mode, including PPPoE, Static IP, and Dynamic IP.
General| Model | CF-XR186 |
|---|---|
| Type | Wi-Fi Range Extender |
| Wireless Standard | IEEE 802.11ac/a/b/g/n |
| Frequency | 2.4GHz & 5GHz |
| Maximum Speed | 1200Mbps |
| Ports | 1x 10/100Mbps Ethernet Port |
| Button | WPS button |
| Power Supply | 100-240V AC 50/60Hz |
| Operating Temperature | 0°C ~ 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10%~90%RH Non-condensing |
| Storage Humidity | 5%~90%RH Non-condensing |
| Wireless Rate | 2.4GHz: 300Mbps, 5GHz: 867Mbps |
To Next Page