COMGROW COMGO Z1 Beginner's Guide

Manual Creation Devices
3
1. Click to
open "Create
Manually"
and select
"GRBL"
3. Set the machine's starting point to "Front Left".
Then turn on "Auto Home" and click on the next
step
5. Confirm the set parameters again and click
Finish
6. Now that you have finished setting the
parameters, click OK
2. Click on
"Serial/USB" and
Next, enter the
length 400 for
X-axis/400 for
Y-axis and click
on Next
1
2
4
5
6
3
06

COMGROW COMGO Z1 Specifications

General

Brand	COMGROW
Model	COMGO Z1
Category	Engraver
Language	English