COMINOX STERILCLAVE 24 B - User Manual

SERVICE MANUAL
-Steam Steriliser-
FOREWORD
This manual IS NOT an integral part of the steriliser.
The manual is addressed to qualified, specialised technicians for routine maintenance
and repairs.
Technicians or operators mused be authorised in writing by COMINOX.
Technicians must read this manual and follow the instructions herein contained. COMINOX
is not liable for any injury and/or damage to people or property or to the steriliser itself
should the conditions herein illustrated be disregarded.
This manual contains industrial secrets which must not be disclosed. The manual and its
annexes must not be edited, modified, copied or given to third parties unless authorised
by COMINOX.

Summary

Technician Menu Operations

Inputs and Outputs Display

Calibration and Correction Procedures

Procedures to calibrate temperature probes (PT1/PT2/PT3) and pressure transducer, and correct values.

Maintenance Procedures

Alarm Conditions and Solutions

Water and Temperature Alarms

Alarms for water quality, level, chamber filling, steam, and temperature deviations.

Vacuum, Pressure, and Door Alarms

Additional Checks and Settings

Water Inlet and Printer Troubleshooting

Installation Procedures

Water System Installations

Steps to install automatic water inlet, drain system, and demineralization system.

Component Installations

Guides for installing the SterilCard reader and the printer.

Firmware Upgrade

COMINOX STERILCLAVE 24 B Specifications

General

Brand	COMINOX
Model	STERILCLAVE 24 B
Category	Laboratory Equipment
Language	English