Do you have a question about the COMINOX STERILCLAVE 24 S and is the answer not in the manual?
Displays and monitors the steriliser's input and output statuses.
Procedures for calibrating temperature probes and pressure transducer.
Detailed explanations of different alarm types and their potential causes.
Troubleshooting performance issues and vacuum pump maintenance.
Troubleshooting water inlet and printer operational issues.
Instructions for updating the steriliser's firmware.
Electrical wiring schematics for different steriliser models.
Hydraulic schematics illustrating fluid paths for various models.
| Category | Laboratory Equipment |
|---|---|
| Chamber Volume | 24 liters |
| Operating Pressure | 2.1 Bar |
| Chamber Material | Stainless Steel |
| Sterilization Temperature | 134°C |
| Power Supply | 230V, 50/60Hz |
| Pressure Range | 0 to 2.5 bar |
Loading...