11
Θ ID setting of CCU-310EV by DIP switch (S/W5 ~ S/W8).
(Refer to 5-2-1. “ID setting method by DIP switch”)
Ι Call guard station by pressing " ID SET" button.
Κ ID of CCU-310EV shown on guade station. (shown like "9501-XXXX")
Ex) If SW8 is ON , shown like “9501-0001”.
(Remark)
Ȅ Meaning of “9501 – 0001”
“9501” : Serial number of CCU-310EV device (household input mode / household floor mode)
“0001” : ID of CCU-310EV (Set by DIP switch)
Λ Setting household’s building number, and CCU-310EV’s ID from guard station.
Ex.1) In case building 101’s CCU-310EV ID is “1”
1> Call guard station by CCU-310EV ID_SET button.
2> From guard station (During calling status)
“Remote” button Î “101”(Building No.) Î “
ミ
” Î “0001”(ID No.) Î “#” Î Call End
Ȅ Registration complete : Building 101’s ID is number 1.
Î EL calling button can be connected from 1
st
floor to 10
th
floor.
Î “PORT_1” : 1
st
floor ~ “PORT_10” : 10
th
floor.
To Next Page
Loading...
Need help?
General