6
5. How to set the product for each mode
5-1. Setting method when household input mode
(When you call an elevator from a household)
(Note)Only household input mode is supported when RS-485 interface with Home Network
products.
z It supports only the elevator call function in the household,
z The elevator call function is not supported when the door is opened by the lobby phone.
z Applicable for only specific video phone which provides EL call function.
z Household information must be registered in CCU-310EV to use EL calling.
z Only registered household can use EL calling.
z 1 unit of CCU-310EV can register up to 10 households.
z ID of CCU-310EV can be fixed from “1” to “63”.
z 10 households are set for one CCU-310EV (Up to 630 households)