Commax CCU-310EV User Manual

22
7. How to set a household using PC
Η Connect to PC using RS232 connection.
Θ Run the program to register household information.
Ι The program menu will be displayed.
A. Click Setting. (The communication setting window opens.)
B. Click "Port Reset".
C. Select the COM port for RS232 communication.
D. Select Speed as "115200".
E. Click "Port Open".
F. Select "Household Data Management".
G. If you select "Inport Data from Device", the setting value of CCU-310EV will appear on
the display.
Î The household information assigned to each terminal is displayed as shown below.
: You can change directly after clicking the household information of the terminal.
(Only change building number and household number)

Commax CCU-310EV Specifications

General

Model Name Spec.	CCU-310EV
Wiring	481 DATA : 2 lines (Polarity) / E/V connection : 2 lines (Non-polarity) RS-485 : 3 lines (Polarity)
Distance	1Km (Pie 0.65 wire basis)
Voltage	DC 12V / 1A
Power Consumption	Standby : 55mA / Operation : 70mA
Operating Temp.	0~+40℃