27
z Menu Item Function Description (It is available when clicking the corresponding item.)
1. Control Command Transmission : Supports loading, saving and initializing of household
information.
'Initialize Household list' : When selected, household information saved in
CCU-310EV is initialized.
The initial value is 101 building, and it is basically set as No.1 ~ 10 terminals (No.1 ~ 10).
'Transmission of household information': Saves each modified household information
(modified household information on the display) in the CCU-310EV.
'Household information request': The household information stored in the CCU-310EV is
showed to the display monitor.
2.
Data Management: Use to backup or read household information in a separate file.
'Load Household Information': Loads the backed-up DATA file (MDB file).
'Save Household information': Create backup file by saving current DATA. (MDB file)
3. Password batch change: Do not use.
4.
Building & House number batch change.
If you want to input the number of households in order, you can change them sequentially.
Η Start No : Clicking the corresponding terminal number with a mouse sets the starting terminal number.
Θ Building nimber : Enter the corresponding building number (Building number must be the same)
To Next Page
Loading...