EasyManua.ls Logo

Commax CDV-40Q - Device Operation Guide (Continued); Utility Settings Configuration; System Information and Exit Procedure

Commax CDV-40Q
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
󱇧 UTIL SET
•Move to UTIL SET from setting by using ▽ button and press SELECT to enter into menu.
Then, press
▽ to move to each control mode.
① LED DIMMING : There are 3 scenarios from 1 to 3. It indicates its standby mode through
LED Dimming of the touch button on the front.
② SOUND MUTE(Mute) : If call sound from door unit it too loud, use this function.
※
※
Attention
This function(mute) is limited to the chime from master to sub unit in standby mode.
󱇧 INFORMATION (Model and version check)
•Move to Information from setting by using △/▽ button to check out the model name and
version.
① Model : Indicate the model name.
② Version : Indicate the version
③ Video : Indicate the type of video. (PAL / NTSC) ⇦ PAL/NTSC both are available.
④ Source : Indicate the location of video image displayed on the screen. (DOOR 1/DOOR2)