9
8
Delete Image
Auto record setting
In case of that there is no image recorded, “No Image” appears on the screen.
Area “A” on above-picture, there are operation button.
Press “Del” button to remove the image displayed.
Note : PREV – Previous menu UP/DN - Move the cursor up and down DEL - Remove
the image.
* When you press and hold “UP or DOWN” button for 1 second, move 10 cuts.
3-2-2 Delete All Image
Select “Delete all images” menu, to remove all recorded images at one time.
When you select “Yes”, following message is shown.
Then, press “SEL/PREV” button on the right to move previous menu.
Note : It shall be set as a “Auto Record” mode from manufacturer.
When the visitors call, every visitor automatically is recorded 1 by 1.
Maximum 128 cuts can be saved.
In case 129th cuts is recorded after 128th cuts, it should be replaced from existing
1st cuts (1/128) again.
1) When you enter “time setting” mode, year (“2000”) shall be flickered.
2) Press “SEL” button to active and it turn in red and change current year by using “UP/DN” button.
3) When you press “SEL” button again, updated data shall be saved and turn inactive mode in black.
Then, move to next menu using UP/DN button.
PREV
SEL
UP
DN
Delete Success
[SEL]
Time Setting
PREV
SEL
UP
DN
Year
Month
Day
Hour
Minute
2000
01
03
12
23
PREV
SEL
UP
DN
YES
Delete All Images?
NO
Menu
PREV
SEL
UP
DN
YES
Auto Record Setting
NO
Menu
Menu
3-2-3 Auto Record Setting
Select “Auto Record Setting” menu to automatically save visitors’ images while you are away.
3-2-4 Time Setting
Select “Time setting” menu to set the time and date.
To Next Page
Loading...
Need help?
General
