Commax CMP-2BCT - Line-By-Line Call Function Setting

 28 
13. Line-by-line Call function Setting
•P - Management password - E - 21 - E - 0 - E : available for entire house call
•
P - Management password - E - 21 - E - Line number - E : Call only specified line ex) In
case 1 line ~ 2 line, input "0102".
•
This function is only for specified line call, not for entire house call
①
Press Program Button "P".
②
Press Management Passwords
③
Press Call Button "E".
④
Press number "21" (Program Number).
⑤
Press Call Button "E".
⑥
Select the line for Call
ex) If to Call only from 1 line to 3 line, Press "0103".
⑦
Press Call Button "E".(Changed setting would be input)