Commax CMP-2BCT - Setting the Volume of Voice and Beep Sound

 4
3 
25.
Setting the Volume of Voice and Beep Sound
•P - Management Password - E - 30 - E - Beep Volume (1~2) - Voice Volume (1~7) - E
•This function enables the adjustment of Beep & Voice volume.
① Press Program Button "P".
② Press Management Password.
③ Press Call Button "E".
④ Press "30" (Program Number).
⑤ Press Call Button "E".
⑥ Press desirable Beep Volume (1~2) and then desirable Voice Volume (1~7).
⑦ Press Call Button "E".
<References>
•Beep sound volume applies to paging tone and Button sound tone.