41
23.
Setting the Keypad LED Option
•P - Management Password - E - 20 - 0 - E : Keypad LED OFF?
•P - Management Password - E - 20 - 1 - E : Keypad LED ON
•This function is to set keypad LED ON/OFF.
① Press the Program Button "P".
② Please set up the Management password.
③ Press the Call Button "E".
④ Press number "20" (Program Number).
⑤ Press the Call Button "E".
⑥ Select mode by numbers "0" or "1".
(0 : White keypad LED light only work when you used lobby phone )
(1 : White keypad LED light always on)
⑦ Press the Call Button "E".(It will be changed)
To Next Page
Loading...
Need help?
General
