5
5
3. P-Management Password-E-29-E : Set to be forced opening the Main Entrance door by
SecuMAX.
Door Release by Password
1. Unit Number-K-Unit Password-E : by Unit Password.
2. E-Building Password : by Building Password
How to make a unit Call and guard station Call from a lobby phone
1. Press house number-E : to Household
2. S-Name Search-E : to Household
3.
Press Number ‘9999’-E : to Guard Station
4. Name search-Select Guard-E : to Guard Station
Other settings
1. P-Management Password -E-5-E : Door Release Duration Setting
2.
P-Management Password -E-6-E : Selecting Wiring Methods
(04 : Common 4 wires, 06: Common 6 wires)
3. P-Management Password -E-7-E : Selecting Call Rings (00:MELODY, 01:BELL)
4. P-Management Password -E-8-E : Setting Video Out Impedance
(00: Short range, 01: Long range)
5. P-Management Password -E-20-E : Setting the Keypad LED Option
(00 : Only work when you used lobby phone)
(01 : Always On)
6. P-Management Password -E-20-E : Setting the Keypad LED Option
(00 : Only work when you used lobby phone)
(01 : Always On)
7. P-Management Password -E-21-E : Setting the Call by Unit Line
8. P-Management Password -E-25-E : Setting number of Call Rings
(00 : continuous, 01: once)
9. P-Management Password -E-30-Beep Volume-Voice Volume-E :
Setting the Volume of Voice and Beep Sound
10. P-Management Password -E-24-E : Setting the Direct Call Option
(00 : Press Direct Call number only)
(01 : Press Direct Call number + Call button)
11. P-Management Password-E-4-E-Household number-E : Setting the Direct Call number
12. P-Management Password-E-36-E-Module ID-E-Setting Data-P : Setting the CDV-Converter
To Next Page
Loading...
Need help?
General
