Commencal FCB - Page 11

ASSEMBLY
ASSEMBLY STEPS
STEP 4
DIRECT
MOUNT STEM
(ALTERNATE)
1) For direct
mount stem
such as the
Ride Alpha
50mm,
unscrew
slightly the
two handlebar
bolts.
2) Install the
stem on the
upper crown
and align your
handlebar
using the laser
marking.
STEP 5 BIS
For ZerGap
stem, rst
tighten the
stem in order
to have zero
gap where
marked.
Secondly,
tighten the
frontmost
stem bolts.
STEP 5
Tighten the
front cover
of the stem
or the upper
part.
!
Ensure equal spacing nbetween the front cover
and the body of stem in all 4 positions.
COMMENCAL / P.12