!
MAINTENANCE
BEFORE AND AFTER EVERY RIDE
BEFORE EVERY RIDE
BRAKE CHECK
Check your brakes.They should
be working as usual: not too
hard and not too soft.
AIR PRESSURE CHECK
Check your suspension
pressure by compressing them.
They should feel as previously
set.
Check that your tires are well
inated (better to do so with
a pump with an air pressure
gauge).
BOLT CHECKS
Check all the bolts on your
bike and be sure that there
is no play. You can check
the headset, brake calipers,
seatclamp, wheel axle,
derailleur, stem, frame bolts...
Warning, after use, some parts
can be hot, such as disc rotors.
Warning, do not use high
pressure cleaner. You could da-
maged seals and bearings.
AFTER EVERY RIDE
CLEAN YOUR BIKE
Clean your bike with a sponge
and water.
BIKE CHECK
Check that there are no
problems, any play, defects
(cracks, impacts, deformation,
scratches, decoloration, strange
noises...) on your frame or
components.
LUBE YOUR CHAIN
After washing your bike, apply
some specic lubricant to your
chain.
COMMENCAL / P.25