EasyManua.ls Logo

Commencal FCB - Page 26

Commencal FCB
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECURITY
WARNING
GENERAL
- Always keep your bike clean and in good
working order.
- For your security, follow the instructions given
in the “before your rst ride”m “before and after
every ride”, “monthly” and “yearly” maintenance
sections. These steps will enable you to keep
your bike running smooth.
-Don’t use your bike if you nd any problems.
- Always wear a helmet when you ride your bike.
- Respect the laws of the road and the other
road users.
- Do not overestimate you physical capability
and be aware of the risks associated to bicycle
riding.
- Respect the steps of the assembly instruction
process and settings process. Use only
remplacement parts which are compatible or the
same as original components.
- Be sure to break-in your brake pads when new.
- Do not sit your bike upside down, you can
damage the cockpit, levers or other parts.
- In case of extreme use (like dirt jumping, tricks,
downhill, competition) you are responsible for any
injuries that may occur.
- For the French market, the installation of
lighting, reecting and warning devices are
compulsory to ride on public roads as per local
road regulation.
IN THE EVENT OF A CRASH
If you crash, you must check that no component
(or your frame) has been damaged. If so, replace
it accordingly. In case of any doubt, seek advice
from a professional.
CORRECT USE
You must respect the intended use your bike
was designed for.
If you exceed these limits, you can damage or
break your bike or components and, as a result,
injured yourself.
REMINDER TO INSTALL SECURITY
ACCESSORIES
We remind you that as well as respecting the law
of the road, and other users, you must install all
necessary security equipment to be safe on the
road.
Refer to the national law in your country for
more details.
COMPOSITE COMPONENTS
For composite components impact damage
may be invisible to the user. In the event of an
impact, you should return your component to
the manufacturer for inspection or destroy and
replace it.
COMMENCAL / P.27

Related product manuals