Commodore 2031 - Adding a Record

STEP 10. Type: 0 and press RETURN
The screen displays: “ENTER ID OF RANDOM DISK”?
STEP 11. Type: CS and press RETURN
STEP 12. Type: 10 and press RETURN
For this example, ten was entered since this is the MAXIMUM
number of records the file can contain. If less records are needed,
specify a number less than ten. The screen displays: “NUMBER OF
FIELDS PER RECORD”?
STEP 13. Type: 4 and press RETURN
This is the number of 'items' each field contains.
The screen displays: “INPUT FIELD NAME, FIELD SIZE, FIELD TYPE”.
TYPES: 0 = BINARY, 1 = NUMERIC, 2 = ALPHA
FIELD 1?” enter: NAME,20,2 and press RETURN
FIELD 2?” enter: PHONE,15,2 and press RETURN
FIELD 3?” enter: ADDRESS,40,2 and press RETURN
FIELD 4?” enter: COMMENTS,40,2 and press RETURN
To Add A Record:
STEP 1. The screen displays: “WHOSE RECORD DO YOU WISH TO
SEE”?
Press RETURN.
The screen displays: “**** ADD RECORD ****”
NAME?
STEP 2. Type: COMMODORE and press RETURN
The screen displays: “PHONE”?
STEP 3. Type: 727-1130 and press RETURN
The screen displays: “ADDRESS”?
STEP 4. Type 3330 SCOTT BLVD SANTA CLARA CA. 95051 and press
RETURN
The screen displays: “COMMENTS”?
58