Chapter
7
SIMPLIFYING
THE USE OF
COMMODORE
DISK-RELATED
COMMANDS
It has been explained that all disk commands must be preceded with the BASIC
PRINT# command and enclosed in quotation marks. This is true, but your
computer can be programmed to perform these tasks as well as how to load and
run programs stored on diskette.
LOADING THE DOS SUPPORT PROGRAM
The first file on the TEST/DEMO diskette contains the program DOS SUP-
PORT. This program, when loaded into memory, takes care of the tasks menti-
oned above. If your computer has Commodore BASIC 4.0 you can use the quick
load procedure to load the DOS SUPPORT program. For those of you not
equipped with BASIC 4.0, the following procedure will work:
71
To Next Page
Loading...
