73ENGLISH
Troubleshooting
• If the robot vacuum cleaner detects a problem, the power
button
will ash red – an error description will be reported
via the app:
Error Meaning Solution
1 Check the laser module. Clean the laser module with a lint-
free, soft, dry cloth. Remove foreign
objects. Place the robot vacuum clea-
ner in a dierent location and restart.
2 Anti-fall sensors
are not working.
Clean anti-fall sensors and
gently shake the bumper.
3 The robot vacuum clea
-
ner cannot move.
Place the robot vacuum cleaner in a
dierent location and restart.
4 Distance sensor
is not working.
Clean the distance sensor with a lint-
free, soft, dry cloth. Remove foreign
objects. Place the robot vacuum clea-
ner in a dierent location and restart.
5 Robot vacuum cleaner
temperature is above/
below the norm.
Switch o the robot vacuum cleaner.
Wait until the temperature of the robot
vacuum cleaner has normalised.
Observe the safety instructions.
6 Error during charging. Check the connection between the
power adapter and the charging
station. Check the charging contacts
of the robot vacuum cleaner and char
-
ging station and clean if necessary.
• If the robot vacuum cleaner repeatedly collides with the same
obstacle, the bumper may be jammed.
Check the bumper for dirt.
Remove any foreign objects that may be present.
• If the battery life is shortened, the battery may not be fully
charged. Charge the robot vacuum cleaner completely.
To Next Page
Loading...