CommScope ION-M7P Manual

Manual for ION™-M7P/17P (M-cab)
& Subassemblies
Page 15 MF0145A7A_uc_FCC_modif.doc
The ION can be easily set-up and supervised from a graphical user interface (GUI).
Remote units are commissioned through the use of built-in test equipment. An auto
levelling function compensates for the optical link loss making installation easy and
quick.
The entire system can be monitored remotely by the Andrew OMC. This platform
uses SNMP protocol and is compliant to X.733 standard. Should a sophisticated
interface not be required, the master unit can be directly connected to the alarm
interface of a base station via its contact relay.
Features at a glance
 Reduced visual impact form factor
 Optimized power consumption
 Efficient, high power amplifier
 Multi-operator support
 Complete operations and management system for configuration and alarming
 OMC with SNMP according to X.733 standard
 3GPP TS25.143/TS25.106/36.143/TS36.106 and 3GPP2C.S0051-0 compliant
 Single fiber for multiple bands and multiple remotes
 Easy installation and commissioning

CommScope ION-M7P Specifications

General

Brand	CommScope
Model	ION-M7P
Category	Remote Control
Language	English