CommScope ION-M7P Manual

Manual for ION™-M7P/17P (M-cab)
& Subassemblies
Page 24 MF0145A7A_uc_FCC_modif.doc
12. The unit complies with the surge requirement according to EN 61000-4-5 (fine
protection); however, it is recommended to install an additional medium (via local
supply connection) and/or coarse protection (external surge protection),
depending on the individual application, in order to avoid damage caused by
overcurrent.
13. Observe the labels on the front panels before connecting or disconnecting any
cables.
4.2.2. Connections
Alarm
output
N-a
ntenna
connector
Mobile AWS
External
alarm input
RS485
connector
Status
LED
figure 4-5 Connector flange of ION-M7P/17P
Grounding bolt
N-antenna
connector
Mobile LTE700
Mains
connector
Optical-fibre
connector

CommScope ION-M7P Specifications

General

Brand	CommScope
Model	ION-M7P
Category	Remote Control
Language	English