CommScope ION-M7P Manual

Manual for ION™-M7P/17P (M-cab)
& Subassemblies
Page 9 MF0145A7A_uc_FCC_modif.doc
12. Before opening the unit, disconnect mains.
13. ESD precautions must be observed! Before commencing maintenance work, use
the available grounding system to connect ESD protection measures.
14. This unit complies with European standard EN60950.
15. Make sure the repeater settings are according to the intended use (see also
product information of manufacturer) and regulatory requirements are met.
16. Although the repeater is internally protected against overvoltage, it is strongly
recommended to earth the antenna cables close to the repeater’s antenna
connectors for protection against atmospheric discharge.
17. Laser radiation! Do not stare into the beam; do not view it directly or with optical
instruments.

CommScope ION-M7P Specifications

General

Brand	CommScope
Model	ION-M7P
Category	Remote Control
Language	English