CommScope RUCKUS Unleashed T350c User Manual

Unleashed T350c Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instrucons on how to eld-
install the Unleashed T350c access point (AP). For detailed informaon on
conguraon and administraon of your Unleashed T350c AP, refer to the
Unleashed Online Help, available from hps://docs.commscope.com/
bundle/unleashed-200.11-onlinehelp.
WARNING! Only trained and qualied personnel should be allowed to
install, replace, or service this equipment.
WARNING! Installaon of this equipment must comply with local and
naonal electrical codes.
CAUTION! Form a 80-mm to 130-mm (3-in. to 5-in.) drip loop in any
cable that is aached to the AP or the building. This will prevent water
from running along the cable and entering the AP or the building where
the cable terminates.
CAUTION! Be sure that grounding is available and that it meets local
and naonal electrical codes. For addional lightning protecon, use
lightning rods and lightning arrestors.
CAUTION! Make sure that proper lightning surge protecon
precauons are taken according to local electrical code.
CAUTION! RUCKUS strongly recommends that you wear eye protecon
before mounng the T350c.
Before You Begin
Before deploying RUCKUS products, please check for the latest soware
and the release documentaon.
• Release Notes and other user documentaon are available at hp://
support.ruckuswireless.com/documents.
• Soware upgrades are available at hp://support.ruckuswireless.com/
soware.
• Soware license and limited warranty informaon are available at
hp://support.ruckuswireless.com/warranty.
• Before deploying your RUCKUS Access Point, verify that all items listed
in Package Contents are included in the package. If any item is damaged
or missing, nofy your authorized RUCKUS sales representave. Also,
make sure that you have the required hardware and tools.
This Guide in Other Languages
• 请从以下网站获得该指南的简体中文版 hp://
docs.commscope.com/?docs-box.
• Vous trouverez la version française de ce guide à l'adresse suivante
hp://docs.commscope.com/?docs-box.
• このガイドの日本語版は hp://docs.commscope.com/?docs-box で
ご覧ください。
• 이 가이드의 한국어 버전은 웹 사이트 (hp://docs.commscope.com/?
docs-box) 에서 확인하시기 바랍니다.
• Veja a versão em português (Brasil) deste guia em hp://
docs.commscope.com/?docs-box
• Puede ver la versión en español (América Lana) de esta guía en hp://
docs.commscope.com/?docs-box
Required Hardware and Tools
• No. 2 Phillips screwdriver
• Small at-blade screwdriver
• Wide at-blade screwdriver
• Torque wrench or torque screwdriver with sockets
• Long-nose pliers
• Electrical wire-stripping and terminal-crimping pliers
• Pipe or pole, or a sturdy at surface
• Electric drill with drill bits and customer-supplied wall anchors, at
washers, and hex nuts for at-surface mount
Package Contents
A complete T350c eld-installaon package includes all of the following
items:
• T350c Access Point
• M25 data cable gland
• Ground wire with lug
• Pole/Wall Mount Bracket Kit
• Two steel pipe clamps
• Declaraon of Conformity/Regulatory Statement
FIGURE 1 T350c Package Contents
1. T350c Access Point
2. M25 data cable gland
3. Ground wire with lug
4. Pole/Wall Mount Bracket Kit
Unleashed Network Conguraon
Setup Using the Unleashed Mobile App
To perform setup using the Unleashed Mobile App, download the iOS or
Android app from the app store.
1. As soon as the Unleashed AP is powered on and connected to the
local network, it boots up and begins broadcasng a temporary
unencrypted WLAN named “Congure.Me-[xxxxxx]” from both radios.
2. Using your client’s Wi-Fi connecon sengs, select and associate to
the “Congure.Me-[xxxxxx]” WLAN.
3. Launch the app, and follow the on-screen instrucons to congure
your Unleashed network(s).
FIGURE 2 Unleashed Mobile App for iOS and Android
FIGURE 3 Conguring Unleashed from the Mobile App
Setup Using a Web Browser
1. As soon as the Unleashed AP is powered on and connected to the
local network, it boots up and begins broadcasng a temporary
unencrypted WLAN named “Congure.Me-[xxxxxx]” from both radios.
2. Using your client’s Wi-Fi connecon sengs, select and associate to
the “Congure.Me-[xxxxxx]” WLAN.
3. Launch a web browser and enter the following into the browser’s URL
bar: unleashed.ruckuswireless.com, and press Enter.
4. You will be redirected to the Setup Wizard. Complete the steps in the
Setup Wizard and click Finish.
Copyright
©
2021 CommScope, Inc. All rights reserved. Page 1 of 4
Published September 2021, Part Number 800-72904-001 Rev A

CommScope RUCKUS Unleashed T350c Specifications

General

Brand	CommScope
Model	RUCKUS Unleashed T350c
Category	Wireless Access Point
Language	English