Need help?Do you have a question about the CommScope CAP M2 35LT/35HT F-AC and is the answer not in the manual?
General| Brand | CommScope |
|---|---|
| Model | CAP M2 35LT/35HT F-AC |
| Category | Wireless Access Point |
| Language | English |
Essential safety measures for working with ERA hardware, including grounding and laser safety.
Guidelines for safe installation, including electrical safety and RF exposure.
Steps to prevent damage to electronic components from ESD.
Important safety considerations for mounting the CAP M2 unit.
Instructions for mounting the CAP M2 to a wall.
Step-by-step instructions for mounting the CAP M2 using a wall mounting kit.
Instructions for mounting the CAP M2 with an optional hybrid fiber splice box.
Steps to connect the CAP M2 to a passive RF antenna using coaxial cable.
Procedure for connecting the optical fiber cable to the CAP M2.
Guide for installing SFP+ modules into the CAP M2 unit.
Instructions for connecting the CAP M2 to a Classic CAN or TEN device via fiber.
Steps to connect the power cable to the CAP M2.
Steps to connect the AC or DC power cable to the CAP M2 Mains connector.
Instructions for powering the CAP M2 using a hybrid fiber splice box.
To Next Page
